ACORD 125 and 126 Fillable Forms—Field Map

Authorized fillable ACORD 125 and 126 forms are available through ACORD, participating agency systems, carrier portals, and wholesalers; this page explains how to complete the pair with a 9-part field map, filled example, and 7-error checklist to reduce rework. ACORD 125 and 126 fillable forms are the account-level commercial insurance application and the commercial general liability section agencies often pair for GL submissions.

Twig does not host copyrighted ACORD forms. The verified starting point is the official ACORD Forms page; availability inside an agency management system, carrier portal, or wholesaler depends on your organization’s access and licensing.

TL;DR: Get current authorized forms from ACORD or a licensed workflow, not from an unverified PDF result. Fill ACORD 125 first as the account-level application, then ACORD 126 for commercial general liability details, and collect the intake before your CSR starts typing.

Key takeaways:

• ACORD 125 is the account-level commercial application; ACORD 126 is commonly used for commercial general liability details.
• This reference was checked against ACORD 125 Commercial Insurance Application, edition 2016/03, and ACORD 126 Commercial General Liability Section, edition 2016/09. Check the edition date and carrier instructions before submission.
• A fillable ACORD 125 and 126 packet is only as clean as the intake behind it.
• Complete named insured, entity, operations, locations, prior insurance, losses, sales, payroll, subcontractor controls, and contract requirements before sending to market.
• The seven checks I recommend are legal name, operations, exposure basis, locations, loss history, subcontractor controls, and signature.
• Use Sera for front-door intake capture and routing when your CSRs are busy, but keep coverage advice and binding with licensed staff.

ACORD 125 and 126 field order and map

Fill ACORD 125 first, then ACORD 126, because the 125 sets the applicant, producer, effective dates, locations, prior insurance, and signature details that should match the GL section. This is a workflow recommendation, not a rule that overrides the current form edition, state requirements, or carrier instructions.

As Twig’s CEO, I spend a lot of time studying the agency front desk: quote calls, service requests, transcripts, and the handoffs that land on a CSR’s desk. For a small commercial GL submission, I would run the work in this order:

1. Collect intake from the prospect or insured before opening the PDF.
2. Complete ACORD 125 with the legal name, entity type, mailing address, business description, locations, prior coverage, loss history, and signatures.
3. Complete ACORD 126 with GL exposures, classifications, limits, operations, products, completed operations, subcontractors, and special hazards.
4. Attach loss runs, supplemental applications, carrier questionnaires, schedules, and contract insurance requirements when required.
5. Have a licensed producer or account manager review before submission.

Do not start with the 126 just because the quote is for general liability. The underwriter still needs the account-level picture: who the applicant is, where they operate, how long they have been in business, what prior coverage they carried, and what losses they have had.

This map follows the ACORD 125 2016/03 and ACORD 126 2016/09 layouts I reviewed. Check the edition date printed on your form and follow carrier instructions where a field, schedule, or supplement differs.

Part	Form	What it captures	Who usually knows it	CSR note
1. Applicant identity	ACORD 125	Legal name, DBA, mailing address, phone, email, entity type	Owner, principal, producer	Match the legal entity to tax records, lease, contracts, and prior policy
2. Policy request	ACORD 125	Proposed effective date, lines requested, billing, payment, and audit details where the form or carrier asks	Producer, account manager	Make dates match the carrier submission and any expiring policy
3. Business description	ACORD 125	Operations, years in business, website, FEIN, SIC or NAICS when available	Owner, producer	Avoid vague phrases like contractor or consultant
4. Locations and premises	ACORD 125	Owned, leased, or occupied premises and location schedule	Owner, CSR	Make location numbers line up with ACORD 126 and any carrier schedule
5. Prior insurance and losses	ACORD 125	Prior carrier, policy period, premiums where requested, cancellations, claims	Insured, prior agent, carrier loss runs	Ask for loss runs early, not after the submission stalls
6. General underwriting questions	ACORD 125	Bankruptcy, foreclosure, cancellations, hazards, subsidiaries, past coverage issues, and other account-level questions	Owner, producer	Do not answer unknown questions from habit
7. GL coverage request	ACORD 126	Liability limits, deductibles or retention where requested, occurrence or claims-made basis, and claims-made details if applicable	Producer, account manager	Coverage selections should be reviewed by licensed staff
8. GL classifications and exposures	ACORD 126	Classifications, exposure basis, payroll, sales, area, units, employee count, or other rating basis requested	Owner, bookkeeper, producer	Tie every exposure to the right location and operation
9. Products, completed operations, subs, hazards	ACORD 126	Products, work away from premises, subcontractors, risk transfer controls, special hazards, and related remarks	Owner, operations manager	Record additional insured and certificate needs in the applicable remarks, schedule, certificate workflow, or carrier supplement rather than assuming one dedicated 126 field

For a fuller breakdown of the base commercial application, bookmark our ACORD Commercial Insurance Application 125 field map. If the account also needs workers comp, use the same intake discipline with the ACORD 130 fillable field map.

Filled example: small contractor GL submission

A filled example shows how ACORD forms 125 and 126 should tell the same story. The example below is not coverage advice and is not a substitute for ACORD instructions, carrier underwriting guidelines, state supplements, or licensed review.

Scenario: Evergreen Patio and Fence LLC calls on a Tuesday afternoon. The owner needs general liability for a new commercial lease and wants certificates for two job sites.

Intake item	Example answer	Where it usually goes
Legal name	Evergreen Patio and Fence LLC	ACORD 125 applicant
DBA	Evergreen Outdoor Builds	ACORD 125 named insured, DBA, or remarks, depending on form edition and agency practice
Entity type	Limited liability company	ACORD 125 entity section
Mailing address	1180 North Maple Ave, Fresno, CA 93722	ACORD 125 applicant address
Operations	Residential fence installation, patio covers, minor concrete pads related to patio work	ACORD 125 business description and ACORD 126 classifications or remarks
Years in business	4 years under current entity; owner has 11 years trade experience	ACORD 125 business information and remarks where appropriate
Locations	Office at owner home, storage yard leased month to month	ACORD 125 premises and location schedule; reference consistently on ACORD 126 if exposures differ by location
Annual gross sales	$780,000 projected for next 12 months	ACORD 126 exposure basis if carrier rates by sales
Annual payroll	$310,000 for field employees, excluding owner	ACORD 126 exposure basis if carrier rates by payroll
Subcontractors	Concrete finishing subcontracted on about 15 percent of jobs; certificates required before work starts	ACORD 126 subcontractor questions, remarks, or carrier supplement
Products exposure	No manufacturing or resale of products; installs materials purchased from suppliers	ACORD 126 products and completed operations questions where applicable
Prior carrier	ABC Mutual, policy expiring next month	ACORD 125 prior insurance
Losses	One property damage claim 18 months ago, $4,800 paid, closed	ACORD 125 losses and ACORD 126 remarks if relevant to the GL exposure
Additional insured needs	Landlord and several general contractors request additional insured status	Applicable additional interest schedule, remarks, certificate workflow, or carrier supplement

Here is the key: the same facts should not drift across the packet. If the 125 says the business installs fences and patio covers while the 126 only says artisan contractor, an underwriter may ask follow-up questions. If the 125 lists one premises and the 126 references two locations, the submission may require reconciliation before underwriting continues.

The right goal is not to type fast. The right goal is to submit a packet that gives the underwriter enough clean information to consider pricing, while accepting that follow-up questions may still happen.

How to cut ACORD 125 and 126 intake time

Cut ACORD 125 and 126 intake time by separating collection, review, and PDF entry instead of letting one interrupted CSR do all three at once. My opinion: the biggest win is not automation by itself; it is protecting the work that requires judgment.

A practical workflow for a 5 to 50 person agency looks like this:

Step	Who handles it	Tool or artifact	What it reduces
1. First contact	Reception, CSR, producer, or AI front desk	Phone, web chat, email, text	Voicemail, missed web leads, and cold callbacks
2. Basic qualification	CSR or AI front desk	Intake script	Personal lines calls, service calls, and incomplete quote requests landing in the wrong place
3. Commercial intake	CSR or producer assistant	Structured questions	Back-and-forth for sales, payroll, operations, subcontractors, and prior losses
4. Licensed review	Producer or account manager	Intake notes and prior policies	Coverage decisions being made by the wrong role
5. PDF completion	CSR or commercial lines assistant	Fillable ACORD 125 and 126	Reopening the file repeatedly because basic facts were missing
6. Submission check	Account manager or producer	Carrier checklist	Missing signatures, loss runs, supplements, and contract requirements

The operational rule is simple: do not make your most interrupted person also be the only person responsible for accuracy. If your CSR is answering billing calls, ID card requests, certificate requests, and new business quote calls in the same hour, the risk of incomplete or inconsistent entries rises.

Here is the phone script I would put next to the desk for a CSR or producer assistant.

Start with identity

• What is the exact legal name of the business?
• Do you use any DBA or trade name?
• What type of entity is it: LLC, corporation, partnership, sole proprietor, or something else?
• What is the best email and mobile number for the person who can answer underwriting questions?

Define the operation

• Describe what you do in plain English, including the work you do not do.
• What percentage of revenue comes from each operation?
• Do you work at customer locations, your own premises, job sites, or online only?
• Do you install, manufacture, sell, repair, consult, inspect, or subcontract any work?

Get the numbers

• What are projected gross sales for the next 12 months?
• What is annual payroll, separated by office, field, owner, and subcontractor where possible?
• How many employees do you have now?
• How many vehicles, locations, or job sites are involved, if relevant?

Ask about history

• Who is the current or prior carrier?
• When does the current policy expire?
• Have you had any cancellations, non-renewals, or lapses?
• Have there been any claims or incidents during the lookback period requested by the current form, carrier, or supplement?

Ask about contracts and certificates

• Do any landlords, GCs, vendors, or customers require additional insured status?
• Do they require primary and noncontributory wording, waiver of subrogation, or specific limits?
• Do you have sample contract insurance requirements you can email us?

This script can reduce the common CSR loop: call, half-fill the PDF, email for missing details, wait two days, reopen the file, then discover the producer still needs contract requirements.

For broader desk design, our insurance CSR workflow gives a simple six-step model for cutting interruptions without pretending every service call can be automated.

Common ACORD 125 126 mistakes to check

Inconsistent names and vague operations are two practical places to check when a submission comes back for cleanup. These are seven checks I recommend when phones and service requests are interrupting the CSR.

Check	What it looks like	Why it matters	Fix
1. Legal name mismatch	125 says Evergreen Patio LLC, 126 says Evergreen Outdoor Builds	Carrier, policy, certificates, and contracts may not match	Confirm legal name and DBA before typing
2. Vague operations	Business description says contractor	Underwriter may not be able to classify the risk	Ask what work is done, not done, and subcontracted
3. Missing exposure basis	Sales, payroll, area, units, or employee count are blank where requested	Rating review may not proceed cleanly	Ask for projected 12-month figures and label estimates clearly
4. Location mismatch	125 has one location, 126 references two	The submission may need reconciliation	Number locations consistently across the packet and schedules
5. Loss history is too thin	Claims section says none, but loss runs show a paid claim	The file may need correction before underwriting continues	Ask for loss runs early and reconcile before submission
6. Subcontractor details are skipped	Subs are mentioned but no certificate controls or written contract controls are described	GL review often needs risk transfer details	Ask whether certificates, additional insured status, waivers, and written contracts are required
7. No signature or date	Completed packet goes to market unsigned	An unsigned application may be returned or may not satisfy a market’s submission or binding requirements	Add a final CSR checklist before producer review

Certificates often expose weak intake later. If a contractor needs proof of liability right after binding, the agency pays for shortcuts taken during the application. Our ACORD 25 certificate guide covers the downstream COI mistakes that often start with inconsistent applicant data.

Where Sera fits, and where it does not

Sera fits before the ACORD packet, not inside the coverage decision. At Twig, we build Sera for agency intake. Sera is an AI receptionist: she answers every call, text and web chat 24/7, qualifies the caller, and books them with your team.

For a fillable ACORD 125 and 126 workflow, Sera can help with the front-door work:

Intake job	How Sera can help	Human handoff point
Missed commercial quote call	Answer, collect contact details, reason for call, business type, and urgency	CSR or producer reviews the transcript
Web quote lead	Ask basic qualification questions and book the next step	Licensed staff handles coverage discussion
After-hours prospect	Capture the business name, operations summary, callback preference, and requested effective date	Producer follows up during business hours
Existing insured asking for GL changes	Identify the insured and route the request with notes	Account manager reviews and advises
Caller with a licensed question	Escalate according to your agency rules	A person at the agency answers

Sera works across phone, SMS, web chat, email, and WhatsApp with one memory across channels. Every conversation is logged with a full transcript, so a CSR can see what the caller already said instead of starting from zero.

Here are the limits I would want every principal to understand before using Sera around ACORD intake:

• Sera does not bind coverage.
• Sera does not quote premiums.
• Sera does not give coverage advice.
• Sera does not file claims with carriers.
• Sera has no direct integration with EZLynx, HawkSoft, Applied Epic, AMS360, or QQCatalyst. Intake notes go to email or a CRM such as Gmail, HubSpot, Salesforce, or Slack.
• Twig is SOC 2 Type II certified, but Twig is not HIPAA compliant and does not sign BAAs.

If you want to test the front-door workflow, Sera is live in under 30 minutes for most businesses by forwarding the phone line or adding website chat. Pricing starts at $49/mo on Starter, with a 15-day free trial, voice included, and no credit card. Growth starts at $499 per month and includes appointment booking, missed-call text-back, live transfers, and multilingual conversations; those features are not included on Starter. See Sera pricing for current plan details.

ACORD 125 and 126 fillable FAQs

These short answers are written for a producer, CSR, or principal who needs a quick reference before sending a commercial GL submission.

What is the difference between ACORD 125 and 126 forms?

ACORD 125 is the main commercial insurance application and captures applicant, business, location, prior insurance, loss, and signature details. ACORD 126 is the commercial general liability section and captures GL-specific exposures such as operations, classifications, products, completed operations, subcontractors, and liability coverage details.

What is an ACORD 126 form?

ACORD 126 is the commercial general liability application section used with a commercial insurance submission. It gives the underwriter GL-specific information that is not fully captured on the base ACORD 125. Always check the edition date and any carrier supplement before submission.

How do you fill out an ACORD 126 form?

Start with a completed ACORD 125 so the named insured, locations, and effective dates match. Then complete the GL coverage, classification, exposure, products, completed operations, subcontractor, and special hazard sections using intake from the insured and review from licensed staff.

What is an ACORD 125 form?

ACORD 125 is the base commercial insurance application used for account-level information. It is commonly paired with line-specific forms such as ACORD 126 for commercial general liability, ACORD 140 for property, and ACORD 130 for workers compensation.

Where can I get a fillable ACORD 125 and 126?

Start with the official ACORD Forms page. Your agency management system, a carrier portal, or a wholesaler may also provide fillable forms if your organization has access and licensing. Do not rely on a random ACORD 125 126 fillable PDF from search results unless you have confirmed the edition date and that the market will accept it.

Next step: make the packet boring

The best ACORD 125 and 126 workflow is boring: one intake script, one field map, one review checklist, and no guessing. Pick one recent GL submission that bounced back from underwriting, compare it to the 7-error checklist above, and turn the missing questions into your agency’s standard intake script.

If the issue is that calls are hitting voicemail while your CSRs are already buried, answer and qualify the front door first. You can call Sera’s live demo line at (650) 795-7838 and decide whether an AI front desk belongs in front of your ACORD intake process.